A Suffolk horse bedding manufacturer and its managing
director have been fined after a young employee's arm was crushed when he was
removing compacted dust from a baling machine.
Christopher Barker, who was 17 years old at the time of the
incident, was working on the machine with the side guard removed to clear dust
and wood shavings from a press plate which had blocked, preventing the machine
from operating properly. As he was removing the debris the machine was
activated, crushing his arm between the plate and the hatch opening.
Mr Barker suffered damage to the muscle, tendons and nerves in his left arm which required two surgical procedures and a blood transfusion. Muscle and skin had to be removed from his arm due to the extent of the injury with subsequent skin grafts required. He suffers nightmares and flashbacks as a result of the incident.
Thetford-based Equestrobed was prosecuted by the Health and Safety Executive (HSE) after an investigation found the incident, on 5 March 2013, could have been prevented had the firm followed the correct procedure for isolating power to the machine and adopted a safe system of work for clearing the blockage.
Bury St Edmunds Magistrates' Court heard the baler machine had suffered a similar fault on a previous occasion which had been rectified by Mr Barker and another colleague in a similar way.
HSE's investigation revealed that on both occasions, the machine was not adequately isolated from power whilst access was being made to the press. In addition, a suitable system of work was not in place to prevent access to dangerous moving parts.
Equestrobed, of Unit 6, Little Heath, Barnham, Thetford, was fined £18,000 and ordered to pay £6,929 costs after pleading guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974.
Timothy David Howard, managing director, was fined £1,800 after pleading guilty to breaching Section 37(1) of the Health and Safety at Work etc Act 1974.
IOSH
Working Safely, IOSH
Directing SafelyMr Barker suffered damage to the muscle, tendons and nerves in his left arm which required two surgical procedures and a blood transfusion. Muscle and skin had to be removed from his arm due to the extent of the injury with subsequent skin grafts required. He suffers nightmares and flashbacks as a result of the incident.
Thetford-based Equestrobed was prosecuted by the Health and Safety Executive (HSE) after an investigation found the incident, on 5 March 2013, could have been prevented had the firm followed the correct procedure for isolating power to the machine and adopted a safe system of work for clearing the blockage.
Bury St Edmunds Magistrates' Court heard the baler machine had suffered a similar fault on a previous occasion which had been rectified by Mr Barker and another colleague in a similar way.
HSE's investigation revealed that on both occasions, the machine was not adequately isolated from power whilst access was being made to the press. In addition, a suitable system of work was not in place to prevent access to dangerous moving parts.
Equestrobed, of Unit 6, Little Heath, Barnham, Thetford, was fined £18,000 and ordered to pay £6,929 costs after pleading guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974.
Timothy David Howard, managing director, was fined £1,800 after pleading guilty to breaching Section 37(1) of the Health and Safety at Work etc Act 1974.
No comments:
Post a Comment